Free Global Shipping Starts at $50
Free shipping on all orders over $50
7-15 days international
14 people viewing this product right now!
30-day free returns
Secure checkout
31509074
Replacement instructionsThis product is replacement type mouse feet you must remove the original mouse feet until you see the screw hole. Alcohol swap is used to clean residual glue please apply your new mouse feet after air-dried of feet sockets.Steps:1. If your stock feet are loose enough, use a knife or a thin edge to pry them off the mouse. If they are tightly stuck, use a hairdryer to heat the feet, as this will also heat the glue underneath and loosen it enough to remove. Try to keep the adhesive attached to the feet when removing, as to make the job easier later on.2. After all the feet have been removed (don't forget the foot around the sensor, if there is one), use an alcohol swap to carefully remove all traces of adhesive on the mouse. Make sure the foot socket is completely clean and dry.3. Peel the mouse feet from the packaging, taking care to bend them as little as possible. Apply the mouse feet slowly, and make sure it lines up with the mouse socket.4. Apply light pressure around the mouse foot or put your mouse on pad and apply light pressure to make sure they are smooth fit. After those steps above you have complete the mouse feet apply. Let’s enjoy the gaming time!What's in the Package1 Set Gaming Mouse Feet1 Alcohol swap
SMOOTH GLIDE - Common mouse feet edge is cut by 90 degree right angle, this will take sharp edge and cause rough glide between mouse and pad. This mouse feet has adopt rounded curved edge which can reduce friction from mouse pad helpfully and extended its service life.
PRECISION AND CONTROL - The use of Teflon feet provides full control over the movement of the mouse on the working surface. Both with sweeping movements and with minimal mouse movement. It is now easier to achieve maximum cursor precision.
HIGH RESOURCE - The thickness of the material is selected individually for each mouse model in such a way as to provide the maximum resource of use, without violating the usual lift-off distance of the sensor.
QUALITY MATERIAL - Only 100% pure PTFE material is used in the production of glides. Virgin-grade PTFE has the lowest coefficient of friction. As well as specially selected 3M9795 glue, which ensures reliable fixation of glides, and no residue removal.
BREAK-IN PERIOD - When the mouse feet do not perform well out of the box - sometimes it needs to be used before the PTFE will "polish-up" and begin gliding smoother or faster. Generally speaking this mouse feet will become more and more smoothly by using.
